1.Small production
Steps:
1. Design in computer, you
may use CorelDraw, Photoshop, Illustrator, Freehand, etc. software to
make
design in your
computer
2. Put the blank printable overlay/film into the laser
or inkjet printer (Epson C1100 laser printer or R210
inkjet printer is
recommended), reverse-print (Note: when you put the printable overlay/film
into the inkjet
printer, please put
right side for print, DON’T PUT WRONG SIDE!) Please print one side on PET
film A,
and print the other
side on PET film a. (same for B with b, C with c, D with d)
3.
After printing, let the printed film dry around 5-10 minutes, then, remove
the protection film from the
both sides of the
core PVC sheet, put one printed film on one side of the PVC sheet and put
the other
printed film onto
the other side of the PVC sheet, then, put them all into the pouch
laminator for
lamination. You may
set the temperature around 160C, to get a better laminating result, you
may
laminate
twice.
4. After laminating, use a cutter to cut the laminated
sheet into two half sheets (two pieces of sheet with
size of
100x300mm)
5. Put the sheet into manual puncher for
punching
6. After punching, you will get a final
cards. |
